DOUBLE BELT PRESS

Overview

Heating and cooling while maintaining pressure. An Isobaric double belt press for continuous production.

The Isobaric double belt press designed by our company is more efficient in pressurizing, heating and cooling than conventional presses, raising the productivity and manufacturing quality for our clients.

Our technology is rare, both domestically and internationally, and is the reason why we are considered a top global niche company.

System configuration (heater pulley / belt tracking control system / sealing system / induction heating system / cooling system)

Features

  • Simultaneous heating and cooling can be performed under pressure, making continuous production possible.

    The Isobaric double belt press uses a unique sealing system to pressurize, heat, and cool the workpiece while transporting it between the upper and lower belts. This enables continuous production, which is not possible with a conventional batch system, and results in improved productivity and cost reduction.

  • Induction heating is used to improve heating efficiency.

    Since the Induction heating method can apply heat directly to the belt, the heat-up time is shorter than that of machines that use hot plates or heat transfer oil, contributing to more efficient heating. Another advantage is that it has less effect on the temperature of the peripheral parts around the belt.

  • We design according to the client's requirements from scratch.

    It is our top priority to listen to the needs of our clients, enabling us to work together to propose further improvements, such as downsizing, weight reduction, and detailed customization through the latest technology.

Applicable Fields / Products

  • Metal-based composites, Laminated Products (CCL, etc.)
  • Fiber-reinforced plastic (CFRP, GFRP, etc.)
  • Functional films
  • Cross-linking (rubber vulcanization, etc.)
  • Various types of boards

Performance

Pressurization Performance
~10MPa *note*note: While the general roller type presses use "linear pressure" to make materials, our Isobaric double belt press with its unique sealing system can apply "surface pressure", which greatly increases the pressurized area.
Heating Performance
~400℃
Cooling Performance
80℃~
Pitch Line Speed
~15m/min
Product Width
~1500mm

The above figures are for reference only. They may vary depending on your needs and design.

Manufacturing Process

  1. Prototyping on Test Equipment
  2. Determining Required Specifications
  3. Quotation
  4. Design and Manufacturing
  5. Trial Run
  6. Delivery
  7. Maintenance (on request)

It is of great importance for us to maintain strong communication with our clients. We take pride in our domestic manufacturing. We will carefully listen to you in detail, make prototypes using test equipment to confirm manufacturing conditions and provide support after delivery.

Please contact us >here for details.

FAQ

  • What is a double belt press?

    It is a machine that continuously pressurizes, heats, and cools the workpiece while feeding it between the upper and lower belts. Because it allows roll-to-roll production, productivity is higher than with batch presses.

  • What types of double belt presses are there?

    There are Isobaric, roller, sliding shoe, and other types.

  • What are the characteristics of the roller type?

    The gap between each roll can be adjusted, and the product is heated and cooled while linear pressure is applied.

  • What are the characteristics of the Isobaric type?

    Because it applies surface pressure, it can pressurize and heat for extended periods. Because it presses hydraulically, it can apply surface pressures of up to 10 MPa. In addition, because the whole process from heating to cooling takes place under pressure, product quality improves.

  • What are the advantages of induction heating?

    Because the belt is heated directly, energy-saving operation is possible. Evaporation and degradation of the pressurizing oil are also reduced, which lowers running costs.

  • What materials and products can it be used for?

    The main applicable fields are metal-based composites and laminated products (CCL, etc.), fiber-reinforced plastics (CFRP, GFRP, etc.), functional films, cross-linking (rubber vulcanization, etc.), and various types of boards.

  • Can prototypes be made before we purchase a system?

    Yes. To confirm manufacturing conditions, we make prototypes on our test equipment before proceeding to design and manufacturing.

  • What product widths and line speeds can be handled?

    For reference, product widths up to 1500 mm and line speeds up to 15 m/min can be handled. These vary depending on your needs and design, so please consult us.

We welcome inquiries about adopting a double belt press, prototyping on our test equipment, converting an existing line to continuous production, and more.

Providing as much of the following as you can will help us work out the specifications more efficiently.

  • Target material (type, thickness, width, layer structure)
  • Required surface pressure, temperature, and cooling conditions
  • Target line speed and production volume
  • Current manufacturing method (batch / continuous)
  • Installation conditions and information on existing equipment
Go to Contact Form
Contact Us About the Double Belt Press